|
 32
1/32 scale Home-Racing
Chassis Components
for chassis T32002, T329003
& T32004 |
| Order
through your dealer or PURCHASE online with Secure Store |
|
T3201 |
Chassis
center section, glass-reinforced Nylon |
 |
$4.49
|
|
T3201SP |
Chassis
center section specially drilled and milled, fitted with contact rails, new
TSC25 stainless-steel guide pin set dead-center, for serious club racing.
See details here.
|
 |
$14.49
|
|
T3202 |
Front
wheel, (2 per car) glass-reinforced Nylon
Each: |
 |
$0.89
|
|
T3203 |
Rear
wheel, (2 per car) glass-reinforced Nylon
Each: |
 |
$0.89
|
|
THP45C |
45-T
64P Spur gear, machined aluminum with 2-56 setscrew. Will fit sidewinder Fly
and GB-Track cars for a much smoother gear setup. Must be used with T3205
pinion. Replaces T3204 |
|
$5.98
|
|
T3205 |
14-T
64P Pinion gear, glass-reinforced Nylon |
 |
$0.99
|
|
T3206 |
Optional
side body-mounting bracket, glass-reinforced Nylon Each: |
 |
$0.89
|
|
T3207 |
Automatic Body Mounting Tool, glass-reinforced Nylon |
 |
$0.89
|
|
T3208 |
Front
axle, stainless steel |
 |
$1.19
|
|
T3209 |
Rear
axle, stainless steel |
|
$1.09
|
|
T3210 |
Body
mounting pin tubing (2 per car) stainless steel
Each: |
 |
$0.69
|
|
T3211 |
Front
tire, (2 per car) silicone compound
Each: |
 |
$1.79
|
|
T3212 |
Rear
tire, (2 per car) silicone compound
Each: |
|
$1.89
|
|
THP3212 |
TSRF/Ortmann high performance rear racing tires,
hand-cast in a silicone-urethane compound, fantastic traction, very
long-lasting. Fit over the T3203 or THP3206 wheels. Sold in pair. |
 |
$7.99
|
|
T3213 |
Contact
rail, positive lead, stainless steel |
 |
$0.39
|
|
T3214 |
Contact
rail, negative lead, stainless steel |
|
$0.42
|
|
T3215 |
TSRF
electric motor with 14T steel pinion |
 |
$8.99
|
|
TD301 |
TSR High Performance
motor. The fastest home-racing motor available anywhere. Fits TSR as well as
many other cars. CCW rotation seen from can end. Supplied without a drive
pinion. Fits all .078" pinions.
Used exclusively for D3 Racing Can-Am. For this specific use, TSR recommends
using Parma-PSE pinion and crown gears, from 8-28 for short tracks to 9-27
for long tracks. NOTE: This is a VERY powerful
motor and is only suitable for use by experts.
WARNING:
Maximum recommended voltage: 13-Volts. Not to be used with power packs
supplied in standard racing sets. Requires 4-amp minimum current. Failure
to use a proper power supply may damage this motor.
WARNING:
rotation is counter clockwise when seen from the pinion side of the motor.
Do not use in incorrect rotation as it will damage the motor.
|
|
$10.95
|
|
T3216 |
Chassis pan,
nickel-plated steel |
 |
$6.99
|
|
TSC01 |
Guide
flag, glass-reinforced Nylon. Fits TSRF24 and TSRF32 cars, perfect for
Carrera track, needs shortening on older tracks shallow slots.
Upgrade to
TSC25 for best results! |
 |
$0.99
|
|
TSC25 |
New stainless steel guide pin for all
TSRF chassis. Allows full rotation of chassis in the slot on narrow-slot
tracks. Suitable for all kinds of tracks. Direct bolt-on or custom
installation.
See assembly
instructions here |
 |
$2.99
|
|
TSC02 |
Spacer
washer, glass-reinforced Nylon. Used when chassis is set in longest
wheelbase. |
 |
$0.39
|
|
TSC03 |
Body-mounting
pin-tubing
stops (4 per car) glass-reinforced Nylon. Used when body is mounted with
straight pins. Set of 4: |
 |
$0.69
|
|
TSC04 |
Guide
spacer, glass-reinforced Nylon. Used when chassis is set in short or medium
wheelbase. |
 |
$0.79
|
|
TSC05 |
Guide
screw, 2-56, stainless steel |
 |
$0.19
|
|
TSC06 |
Nut,
2-56, (3 per car) stainless steel. Each: |
 |
$0.12
|
|
TSC07 |
Body
mount screw, (2 per car) 2-56, stainless steel. Each: |
 |
$0.19
|
|
TSC08 |
Front
axle E-clip (2 per car), cad-plated steel. Each: |
 |
$0.08
|
|
TSC09 |
Braided
contact, (2 per car) braided copper strands. Set: |
 |
$0.49
|
|
TSC10 |
Neodymium
traction magnet |
 |
$1.99
|
|
TSC11 |
Body
mounting pin, (4 per car) plated brass. Set: |
|
$0.19
|
|
TSC12 |
Guide
flag with longer blade for commercial tracks, glass-reinforced Nylon. Length
of blade is increased by 2mm. This guide is included in T24002, T24003,
T24004, T24001A, T24001B, T24001C, T24001D. Each:
Upgrade to
TSC25 for best results! |
 |
$0.99
|
|
TSC13 |
Double-sided
tape body mounting kit (use with T2406 and T3206) |
|
N/A |
|
TSC14 |
2-pack
body mounting epoxy (use with T2406 and T3206) |
|
N/A |
|
TSC15 |
Flat
sheet lead weight w/ two-sided adhesive tape |
 |
$2.49
|
|
TSC17 |
Motor
fastening screw, 2mm stainless steel (2 per car) Each: |
 |
$0.25
|
|
TSC18 |
Hardware
kit with braided contacts for T24004, and T32004 chassis kits |
 |
$2.25
|
|
TSC19 |
Hardware
kit for RTR chassis T24002 and T32002 |
 |
$1.25
|
|
TSC20 |
Hardware
kit with braided contacts for basic chassis kit T24003, T24003HPF, T32003
and T32003HPF |
 |
$0.99
|
|
TSC22 |
2-56
setscrew for TSRF32 spur gears and wheels set of 4: |
|
$1.00
|
|
TSC23 |
Hardware
kit with braided contacts for T24004HPF, and T32004HPF chassis kits |
 |
$1.99
|
|
TT06 |
.035" & .5mm hex wrench for TSRF and most 1/32 scale alloy wheels & spur
gears
|
 |
$7.95
|
|
TSC30 |
1mm anodized aluminum
axle spacer for all TSR chassis kits. Each: |
|
$0.49
|
|
TSC31 |
3mm
anodized aluminum axle spacer for all TSR chassis kits. Each: |
|
$0.69
|
